BRC944B2 Operation Manual

15
Cleaning
Cleaning the remote controller
 Wipe it clean with soft, dry cloth.
Do not use any water hotter than 40°C (104°F), or volatile liquids such as benzine, gasoline and
thinner, polishing powder, or anything hard such as a scrub brush.
When the unit is not used for a long time
 On a sunny day, keep the system running for
half a day in the FAN mode to dry it up inside.
3
12
FAN mode
1 Press
to select the cooling
mode.
2 Press
to adjust the set
temperature to 32°C (90°F).
3 Press .
 The airflow rate remains the same, and is not
adjustable.
 Run the system when the room temperature
is below 28°C (82°F).
 Finally turn off the circuit breaker dedicated for
the room air conditioner.
 Clean the air filter and place it back into
position.