Operation Manual
Table Of Contents
- Feature
- Contents
- Safety Considerations
- Names of Parts
- Preparation before Operation
- AUTO · DRY · COOL · HEAT ·FAN Operation
- Adjusting the Airflow Rate
- POWERFUL Operation
- OUTDOOR UNIT QUIETOperation
- ECONO Operation
- OFF TIMER Operation
- ON TIMER Operation
- Note for Multi System
- Care and Cleaning
- Troubleshooting
- Quick Reference
17
OFF TIMER Operation
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use OFF TIMER and ON TIMER in
combination.
To use OFF TIMER operation
• Check that the clock is correct.
If not, set the clock to the present time.
Page 10
1. Press .
“ ” is displayed on the LCD.
“
” blinks.
• “ ” is no longer displayed on the LCD.
2. Press until the time setting reaches the
point you like.
• Each pressing of either button increases or decreases the time setting by 10minutes.
Holding down either button changes the time setting rapidly.
3. Press again.
• “ ” and setting time are displayed on the LCD.
• The TIMER lamp lights yellow.
Display
To cancel OFF TIMER operation
Press .
• “ ” and setting time are no longer displayed on the LCD.
• “
” and day of the week are displayed on the LCD.
• The TIMER lamp goes off.
NOTE
Notes on TIMER operation
• When TIMER is set, the present time is not displayed.
• Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is canceled when remote controller batteries are replaced.
• When using the ON/OFF TIMER to start/stop operation, the actual operation start/stop time may differ from the time set. (Maximum of about 10
minutes)
NIGHT SET mode
• When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.9°F (0.5°C) up in COOL, 3.6°F (2.0°C) down in
HEAT) to prevent excessive cooling (heating) for your pleasant sleep.
01_EN_3P297290-3C.indd 17 11/17/2015 10:27:19