Service Manual

SiUS091133 Indoor Unit: FTXS15/18/24LVJU
Removal Procedure 210
7
Remove the swing
motors. Caution
When reassembling, do not
confuse the installing order of
the 2 motors and the colors of
the connectors.
If you set the connectors or
motors opposite, the horizontal
blades do not move smoothly or
noise may be heard.
(1) Set the swing motor of the upper
blade first.
(connector: white)
(2) Then, set the swing motor of the
lower blade.
(connector: red)
(3) Fix both swing motors with a
screw.
8
Disconnect the
connector to remove
the swing motor.
5. Remove the swing motor
for vertical blades.
1
Remove the link cover.
Step
Procedure Points
(R16079)
Swing motor (lower blade)
Swing motor (upper blade)
(R9551)
(R9552)
Link cover