Installation Instructions

2 English

Accessories

–

Choosing an Installation Site

Before choosing the installation site, obtain user approval.

1. Indoor unit

• The indoor unit should be sited in a place where:

1) the restrictions on installation specified in the indoor unit installation drawings are met,

2) both air inlet and air outlet have clear paths met,

3) the unit is not in the path of direct sunlight,

4) the unit is away from the source of heat or steam,

5) there is no source of machine oil vapour (this may shorten indoor unit life),

6) cool (warm) air is circulated throughout the room,

7) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may shorten the remote

controller range,

8) the unit is at least 1m away from any television or radio set (unit may cause interference with the picture or sound),

9) install at the recommended height (1.8m),

10) no laundry equipment is located.

2. Wireless remote controller

• Turn on all the fluorescent lamps in the room, if any, and find the site where remote controller signals are properly received

by the indoor unit (within 7m).

• This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for

commercial and household use by lay persons.

• Sound pressure level is less than 70 dB(A).

Mounting plate

Remote controller holder

Operation manual

Titanium apatite photocatalytic

air-purifying filter

Dry battery AAA. LR03

(alkaline)

Installation manual

Wireless remote controller

Indoor unit fixing screw

(M4 × 12L)

Indoor unit