Operation Manual

17
INTELLIGENT EYE Operation
NOTE
■
Notes on INTELLIGENT EYE operation
• Application range is as follows.
90°
55°
7m
55°
Vertical angle 90°
(Side view)
Horizontal angle 110°
(Top view)
7m
• Sensor may not detect moving objects further than 7m away. (Check the application range.)
• Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
• The sensor also mistakenly detects pets, sunlight, uttering curtains and light reected off of mirrors as passersby.
• INTELLIGENT EYE operation will not go on during POWERFUL operation.
• NIGHT SET mode
Page 21
will not go on during use of INTELLIGENT EYE operation.
CAUTION
• Do not place large objects near the sensor.
Also keep heating units or humidiers outside the sensor’s detection area. This sensor can detect undesirable objects.
• Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
[Example]
■
Normal operation
When no one is in the room
Back to normal operation.
The air conditioner is in normal
operation while the sensor is
detecting the movement of people.
20 minutes after, start energy
saving operation
The set temperature is shifted in
±2°C steps.
The air conditioner will return to
normal operation when the sensor
detects the movement of people
again.
Someone is back in the
room
When someone is in the
room
INTELLIGENT EYE operation is useful for energy saving
■
Energy saving operation
• If no presence detected in the room for 20 minutes, the energy saving operation will start.
• This operation changes the temperature -2°C in HEAT / +2°C in COOL / +1°C in DRY operation from set temperature.
When the room temperature exceeds 30°C, the operation changes the temperature +1°C in COOL / +1°C in DRY operation from set
temperature.
• This operation decreases the airow rate slightly in FAN operation only.