Operation Manual
33
Care and Cleaning
CAUTION
• Do not touch the aluminium ns by bare hand at the time of dismounting or mounting the lter.
1. Pull out the air lters.
• Open the front panel.
• Push the lter tab at the center of each air lter
a little upwards, then pull it down.
2) Pull down
1) Push
2. Wash the air lters with
water or clean them with
vacuum cleaner.
• Be sure to remove the titanium apatite
photocatalytic air-purifying lter. Refer to titanium
apatite photocatalytic air-purifying lter on the
next page.
• It is recommended to clean the air lters every
2 weeks.
If the dust does not come off easily
• Wash the air lters with neutral detergent thinned with
lukewarm water, then dry them up in the shade.
3. Set the lters as they were
and close the front panel.
• Press the front panel at both sides and the
center.
■
Air lter