BRC1H71W User Manual

Information screen
Maintenance
Safety Considerations
Wired remote controller
Operation Handbook
3P607381-1
EM19A030
Read this manual before using the product.
• This manual describes the basic operation of the indoor unit which uses the BRC1H71W remote
controller. Keep this manual where it is readily accessible, and refer to it when necessary.
• For detailed contents, refer to the BRC1H71W operation manual on our website.
Also, for explanation about things other than remote controller operation, refer to the operation
manual attached to the indoor unit.
Button Locations and Descriptions
The current status is displayed with icons.
About icons on the information screen
The items displayed vary depending on the indoor unit you are using.
Icon Name Description
Information
Indicates an information screen.
MAIN/SUB remote
controller
Displayed when used as the MAIN/SUB remote controller.
1=main, 2=sub
Bluetooth*
Indicates that the controller is communicating with a
mobile device, for use with the app.
Clock not set
Indicates that the clock needs to be set again.
Setback
Indicates that the indoor unit is operating under setback
conditions.
Under centralized
control
Indicates that the system is controlled by central control
equipment (optional accessory) and that control of the
system by the controller is limited.
Changeover
controlled by the
master indoor unit
Displayed:
The remote controller does not have master control.
Unable to select heating/cooling operation.
Blinking:
None of the remote controllers in the system have master control.
Can be set as the master controller during this time.
Not Displayed:
The remote controller has master control.
Able to select heating/cooling operation.
Backup
Indicates that backup operation is being carried out.
Energy savings
Indicates that the system’s energy consumption is being
limited, and that it is running with restricted capacity.
Individual airflow
direction
Indicates that the individual airflow direction setting is
enabled.
Test operation
Indicates that Test Operation mode is active.
Stand by for Defrost/
Hot start
Indicates that the defrost/hot start mode is active.
Self-cleaning filter
operation
Indicates that selfcleaning filter operation is active.
Inspection
Indicates that the indoor or outdoor unit is being
inspected.
Periodic inspection
Indicates that the indoor or outdoor unit is being
inspected.
Ventilating operation
Indicates that ventilating operation is being carried out.
Warning
Indicates that an error occurred, or that an indoor unit
component needs to be maintained.
* The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
use of such marks by Daikin industries, LTD. is under license. Other trademarks and trade names are
those of their respective owners.
The original instructions are written in English. All other languages are translations of the original
instructions.
Read these SAFETY CONSIDERATIONS carefully before operating the remote controller.
Train the customer to operate and maintain the remote controller.
Inform customers that they should store this Operations Manual with the Installation Manual for future
reference.
Meanings of WARNING, CAUTION and NOTE Symbols:
WARNING
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
It may also be used to alert against unsafe practices.
NOTE
Indicates situations that may result in equipment or property-damage
accidents only.
• The following pictograms are used in this manual.
Never do. Always follow the instructions given.
Keep water and moisture away. Keep wet hands away.
WARNING
• Do not modify or repair the remote controller.
Consult your Daikin dealer for any modication or for repairs.
• Do not relocate or reinstall the remote controller by yourself.
Improper installation may result in electric shocks or re.
Consult your Daikin dealer to relocate or for any reinstallation.
• Do not use ammable materials (e.g., hairspray or insecticide) near the
remote controller.
Do not clean the product with organic solvents such as paint thinner.
The use of organic solvents may cause cracking, damaging the product, causing electric
shocks, or re.
• Consult the dealer if the remote controller was submerged under water due
to a natural disaster, such as a ood or hurricane.
Do not operate the remote controller at this time or a malfunction, electric
shock, or re can occur.
CAUTION
• Do not allow children to play with the remote controller to avoid causing
damage to the product.
• Never disassemble the remote controller.
Touching the interior parts may result in electric shocks or re.
Consult your Daikin dealer for internal inspections and adjustments.
• Do not touch the remote controller buttons with wet ngers.
Touching the buttons with wet ngers can cause an electric shock.
• Do not wash the remote controller.
Doing so may cause electric leakage and result in electric shocks or re.
• Never let the remote controller to get wet.
Water can cause damage to the remote controller, and may cause an electric shock or re.
NOTE
• Never press the buttons of the remote controller with a hard and pointed
object.
The remote controller may be damaged.
• Never pull or twist the electric wire of the remote controller.
It may cause the unit to malfunction.
• Do not wipe the remote controller with benzine, thinner, chemical dustcloth, etc.
The remote controller may get discolored or the coating peeled off. If it is heavily dirty, soak a
cloth in water-diluted neutral detergent, squeeze it well and wipe the remote controller clean.
And wipe it with another dry cloth.
Maintaining the Unit and LCD Display
• Wipe the LCD and surface of the remote controller with a dry cloth when they become dirty.
• If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with
water, squeeze the cloth tightly, and clean the surface. Wipe the surface with a dry cloth.
• Do not use non-neutral detergents or organic solvents (alcohol disinfectant, benzene,
paint thinner, etc.).
May cause cracking, electric shocks or re.
NOTICE
Do not use any paint thinner, organic solvent, or strong acid.
English
SELECT/ACTIVATE/SET button
From the home screen, enter the main menu.
From the main menu, enter one of the submenus.
From their respective submenu, activate an operation/ventilation mode.
ON/OFF button
Press this button to turn
on the system.
Press this button again to
turn o the system.
NAVIGATE/ADJUST
button
Navigate right.
Adjust a setting.
NAVIGATE/ADJUST
button
Navigate left.
Adjust a setting.
Status indicator (LED)
During operation, the light
ring around the display
lights up blue/red/green.
Lights up blue: Operating,
Blinks red: Error is occurring,
Lights up/blinks green:
Bluetooth connecting
LCD
+
-
MODEL: BRC1H71W
01_EN_3P607381-1.indd 1 2020/04/03 10:34:29