BRC1H71W Installation Manual

English 33
Sub-menu screen
0 0 0 0
Enable
0 0 0 0
Set
Cancel
Text mode Icon mode
Press or button, set any password, and
then press
button.
Each time
button is pressed, the digit place
will change. When the 4th digit on the right end
is reached, press
button to return to the
previous screen.
Sub-menu screen
1 2 3 4
Set
Cancel
Enable
1 2 3 4
Text mode Icon mode
Press or button, select “Set” or “ ”, and
then press
button to return to the installer
menu.
If Enable/Disable is set to Enable, the set
4-digit password will be enabled.
If set to Disable, the password will be disabled.
Sub-menu screen
1 2 3 4
Enable
1 2 3 4
Set
Cancel
Text mode Icon mode
Press
or button, move to “Cancel” or
“
”, and then press button to return to the
installer menu.
Other Service Settings
Group Address
• Assign the group address and unit number for centralized control.
• The group and unit address can only be set when a centralized controller is connected.
This menu is only visible when a centralized controller is connected.
• The group and unit address can be “set” and “released”.
NOTICE
Don’t forget to release the group address before disconnecting the centralized controller because the
menu will not be accessible afterwards.
Indoor and outdoor unit Airnet Address
Set the indoor and outdoor unit Airnet Address.
01_EN_EM19A026_IM.indd 33 2020/09/08 14:21:12