BRC1H71W Installation Manual

4 English

Remote controller installation

procedure

Deciding where to install the remote controller

Select the installation location based on “Safety Considerations” (see page 2) and obtain

consent of the customer.

Creating a wiring through-hole in the wall (when opening a

hole in the wall and installing)

If the hole size is too large or not in the

proper location, it may be seen after the

remote controller is installed.

NOTE

3-11/64 (80.5)

13/64

(5)

33/64 (13)

1-47/64 (44)

9/32 (7)

R3/32(2.5)

13/64

(5)

41/64

(16.25)

1-47/64 (44)

35/64

(13.75)

3-11/64 (80.5)

Back plate

Through-hole

Align the center of the wall

hole with the center of the

access hole on the controller

back plate when planning the

installation.

Access hole

[Unit : inch (mm)]

Back plate

Through-hole

Access

hole

CAUTION

• Note that if the wiring through-hole is large or deviates from the specied position, the hole may be

exposed.

01_EN_EM19A026_IM.indd 4 2020/09/08 14:20:59