BRC1H71W User Manual

Overview of screens
Names and Functions
Change setpoint screen
Auto Cool
Set
74
Raise/lower the temperature
Press
and .
Home screen
Auto Cool
73
Room
3P607381-1 EM19A030
[2003]
HT
Information screen
12:34
The list of indoor unit functions, current
time, and error codes, etc. are displayed
as icons.
For the meaning of each icon, refer to
the front side of this sheet.
User menu
Operation Mode
Use or to select the icon you want to change to, then press .
You can change fundamental functions such as the operation mode, fan speed, airow, brightness of Status indicator (LED), and
Fahrenheit/Celsius display.
Changing the operation mode
Auto
Use or to select the operation mode you want to
change to, then press
.
Auto
Heat Cool
Fan Dry
Changing the fan speed
Use or to select the fan level you want to change
to, then press
.
Auto Low Medium High
Changing the airow direction
Use or to select the airow direction you want to
change to, then press
.
Position 0
Swing
Position 1
Position 4
Position 2 Position 3
Auto
The descriptions in this section are just examples. The items available for setting vary depending on the indoor unit you are using.
If there is no button operation for about 10 seconds, the screen returns to the home screen.
Depending on the connected model, some items may not be displayed.
Home screen
Auto Cool
73
Room
STANDBY SETBACK
j
k
i
h
e
d
f
c
b
g l
a
Information screen
12:34
A3-01 (Unit 00)
m o
q
p
n
User menu
Operation Mode
r
s
Screen display explanation
a Operation mode/OFF display
• Displays the operation status.
b Error/Filter/Test icon
• Error, lter and test icons are displayed.
:Error :Filter :Test
c Room/Set
• Indicates whether it’s a room temperature
display (Room) or setpoint display (Set).
d Room temperature/Set temperature
• Displays the current room or setpoint
temperature.
e Fan speed
• Displays the set fan speed.
f Airow direction
• Displays the set airow direction.
g STANDBY
• Displays during defrost/hot start.
h Changeover controlled by the master
indoor unit
• Displayed when another indoor unit on the
system has the authority to change the
operation mode between cool and heat.
i Under centralized control
• Displayed if the system is under the
management of a multi-zone controller
(Optional) and the operation of the system
through the remote controller is limited.
j Fahrenheit/Celsius
• Depending on the setting, Fahrenheit/
Celsius display can be selected.
k Ventilation operation/Air Purify
• Displayed when a Heat Reclaim Ventilator
is connected.
:Ventilation :Air Purify
l Setback
• Blinks during setback operation.
• Displayed during setback setting.
m Information icon
n Clock (24 hours time display)
o MAIN/SUB remote controller sign
p Status
• Noties the status.
q Error display
• If an error occurs, the icon, an error code
and unit number are displayed.
r Settings menu name
s Settings menu icon
Use or to select , then press . Press
.
Press or .
Press
.
Press .
Press and hold for
5 seconds.
01_EN_3P607381-1.indd 2 2020/04/03 10:34:31