MXS Service Manual

SiUS121736EA ARC466A36
Remote Controller 112
2. ARC466A36
Reference Refer to the following pages for details.
1 POWERFUL operation ..........................................................................................................P.63
Signal transmitter
Powerful
1
button
• Starts POWERFUL operation.
Display (LCD)
• Changes the temperature setting.
On/Off button
Auto Indoor unit quiet Low
Middle low
MiddleMiddle highHigh
• Press this button once to start
operation.
Press once again to stop it.
Temperature adjustment
buttons
• Displays the current settings.
(In this illustration, each section is
shown with all its displays on for the
purpose of explanation.)
• To use the remote controller, aim the
transmitter at the indoor unit. If there
is anything to block signals between
the unit and the remote controller,
such as a curtain, the unit will not
operate.
• The maximum distance for
communication is about 19-11/16 ft
(6 m).
Make sure that there are no
obstacles within 19-11/16 inch (50
cm) under the signal receiver.
Such obstacles, if any, may have an
adverse influence on the reception
performance of the receiver and the
reception distance may be
shortened.
Fan setting button
• In indoor unit quiet operation,
operation sound becomes weak.
(The airflow rate also decreases.)
• In DRY operation, the airflow rate
setting is not available.
• Selects the airflow rate setting.
(R24594)
Receiver
19-11/16”
(50 cm)
or more
: AUTO
: DRY
: COOL
: HEAT
: FAN
18 ~ 30 °C
(64 ~ 86 °F)
Not available
18 ~ 32 °C
(64 ~ 90 °F)
10 ~ 30 °C
(50 ~ 86 °F)
Not available
< ARC466A36 >