FVXS Operation Manual
Table Of Contents
- Features
- Contents
- Safety Considerations
- Names of Parts
- Preparation Before Operation
- AUTO · DRY · COOL · HEAT · FANOperation
- Adjusting the Airflow Rate
- Adjusting the Airflow Direction
- POWERFUL Operation
- ECONO Operation
- OUTDOOR UNIT QUIET Operation
- ON/OFF TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- FAQ
- Troubleshooting
- Quick Reference
29
Care
Air fi lter
1. Open the front panel.
Page 28
2. Pull out the air fi lter.
• Press the claws on the right and left of the air lter
down slightly, then pull upward.
3. Take off the titanium apatite
photocatalytic air-purifying
fi lters.
• Hold the recessed parts of the frame and unhook
the 4claws.
ClawClaw
4. Wash the air fi lter with
water or clean it with a
vacuum cleaner.
• It is recommended to clean the air lter every
2weeks.
If the dust does not come off easily
• Wash the air lter with neutral detergent thinned with
lukewarm water, then let it dry in the shade.
• Be sure to remove the titanium apatite photocatalytic
air-purifying lter. Refer to “Titanium apatite
photocatalytic air-purifying fi lter” on the next page.
5. Insert the titanium apatite
photocatalytic air-purifying
fi lters as they were.
6. Reattach the fi lters.
7. Close the front panel slowly.
Page 28
Care and Cleaning
01_EN_3P379751-5C.indd 29 11/9/2015 13:35:47