BRC1H71W Operation Manual

English 15
About icon list of Operation Modes
The indoor unit can operate in various operation modes.
Icon Operation mode Icon Operation mode
Auto
Icons vary depending on the
system.
Fan only
Cool Ventilation + Air Clean
Heat Ventilation
Dry Air Clean
INFORMATION
Available operation mode are depend on indoor unit.
Characteristics of Heat Mode
The system automatically controls the following operating modes to prevent the
reduction of heating capacity and space comfort.
Defrost operation
• The system will automatically go into defrost operation to prevent frost
accumulation at the outdoor unit and subsequent loss of heating
capacity.
• The indoor unit fan will stop, and “
STANDBY
” will be displayed on the
remote controller.
• The system will  nish the Defrost operation and return to normal
usually within six to eight minutes. It won’t last for more than ten
minutes.
Hot start
• When the system starts heating operation, the indoor unit fan will
operate with a delay in order to prevent a cold draft.
(In that case, “
STANDBY
” will be displayed on the remote controller.)
01_EN_EM19A027_OP.indd 15 2020/09/08 14:29:28