BRC1H71W Operation Manual

English 35
Administrator password setting
Password setting for access to administrator screen.
• It is recommended to set a 4-digit password so that users cannot enter the
Administrator menu easily when starting to use this remote controller.
• Be sure to keep the set password secure so that you do not forget it. Also, manage the
password so that it is kept secret from others.
How to setting the password
Installer menu screen
Installer Password
Text mode Icon mode
Press or button, for move to “ ”.
If Bluetooth is connected, performing eld
setting from the remote controller side is
impossible.
Disconnect Bluetooth, or perform eld setting
from the mobile application.
Sub-menu screen
Text mode Icon mode
Disable
0 0 0 0
Set
Cancel
0 0 0 0
a
b
Press or button, select Enable/Disable,
and press
to perform password enable/
disable setting.
a Enable/Disable
b Password
Sub-menu screen
0 0 0 0
Disable
0 0 0 0
Set
Cancel
Text mode Icon mode
Press or button, change the password to
enable/disable, and press
button.
Select “
Enable
” or “
” to enable the
password and select “
Disable
” or “
” to
disable the password.
Sub-menu screen
0 0 0 0
Set
Cancel
0 0 0 0
Enable
Text mode Icon mode
Press or button, to select Password and
press
button.
01_EN_EM19A027_OP.indd 35 2020/09/08 14:29:35