FVXS Operation Manual
Table Of Contents
- Features
- Contents
- Safety Considerations
- Names of Parts
- Preparation Before Operation
- AUTO · DRY · COOL · HEAT · FANOperation
- Adjusting the Airflow Rate
- Adjusting the Airflow Direction
- POWERFUL Operation
- ECONO Operation
- OUTDOOR UNIT QUIET Operation
- ON/OFF TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- FAQ
- Troubleshooting
- Quick Reference
12
English
Basic Operation
Tips for saving energy
Keeping the temperature setting at a moderate level helps save energy.
• Recommended temperature setting
− For cooling: 78-82°F (26-28°C)
− For heating: 68-75°F (20-24°C)
Cover windows with a blind or a curtain.
• Blocking sunlight and air from outdoors increases the cooling (heating) effect.
Keep the air fi lter clean.
• A clogged air lter causes inef cient operation and wastes energy. Clean it once every 2weeks.
Page 29
If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn off the circuit
breaker.
• The air conditioner always consumes a small amount of electricity even while it is not operating.
You can adjust the air ow rate to increase your comfort.
To adjust the air ow rate setting
Press .
• Each pressing of changes the air ow rate setting in sequence.
AUTO Indoor unit quiet Airflow rate 1-5 (Low to High)
• When the air ow is set to “ ”, quiet operation starts and noise from the indoor unit will
become quieter.
• In the quiet operation mode, the air ow rate is set to a weak level.
AUTO, COOL, HEAT and FAN operation DRY operation
The air ow rate setting cannot be
changed.
Adjusting the Air ow Rate
NOTE
Note on air ow rate setting
• At smaller air ow rates, the cooling (heating) effect is also smaller.
01_EN_3P379751-5C.indd 12 11/9/2015 13:35:32