FVXS Operation Manual
Table Of Contents
- Features
- Contents
- Safety Considerations
- Names of Parts
- Preparation Before Operation
- AUTO · DRY · COOL · HEAT · FANOperation
- Adjusting the Airflow Rate
- Adjusting the Airflow Direction
- POWERFUL Operation
- ECONO Operation
- OUTDOOR UNIT QUIET Operation
- ON/OFF TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- FAQ
- Troubleshooting
- Quick Reference
13
Basic Operation
Adjusting the Air ow Direction
You can adjust the air ow direction to increase your comfort.
CAUTION
• Always use a remote controller to adjust the angles of the ap. Moving the ap forcibly by hand may cause a
malfunction.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
To start auto swing
Up and down air ow direction
Press .
• “ ” is displayed on the LCD.
• The aps (horizontal blades) will begin to swing.
To set the ap at the desired position
• This function is effective while the ap is in auto swing mode.
Press when the ap reaches the desired
position.
• “ ” disappears from the LCD.
To adjust the louvers at desired position
Hold the knobs and move the louvers
(vertical blades).
NOTE
Note on air ow direction setting
• The movable range of the ap varies according to the operation mode.
• Unless “Swing” is selected, you should set the ap at a near-horizontal angle in FAN or HEAT operation
and at a upward position in COOL or DRY operation to obtain the best performance.
COOL/
DRY
FAN/
HEAT
Movable range of the flap
01_EN_3P379751-5C.indd 13 11/9/2015 13:35:33