FVXS Operation Manual
Table Of Contents
- Features
- Contents
- Safety Considerations
- Names of Parts
- Preparation Before Operation
- AUTO · DRY · COOL · HEAT · FANOperation
- Adjusting the Airflow Rate
- Adjusting the Airflow Direction
- POWERFUL Operation
- ECONO Operation
- OUTDOOR UNIT QUIET Operation
- ON/OFF TIMER Operation
- WEEKLY TIMER Operation
- Note for Multi System
- Care and Cleaning
- FAQ
- Troubleshooting
- Quick Reference
28
English
Care
CAUTION
• When removing or attaching the front panel, stand on solid ground and use caution.
• When removing or attaching the front panel, support the panel securely with your hand to prevent it from falling.
Front panel
1. Open the front panel.
• Slide the 2 stoppers on the left and right sides
inward until they click.
2. Remove the front panel.
• Remove the string.
• Allowing the front panel to fall forward will enable
you to remove it.
• Disconnect the front panel hooks from the grooves.
String
Hooks
Grooves
3. Clean the front panel.
• Wipe it with a soft damp cloth.
• Only neutral detergent may be used.
• Wash the panel with water, wipe it with a dry soft
cloth, and let it dry in the shade after washing.
4. Reattach the front panel.
• Insert the front panel hooks into the grooves of the
unit (3 places).
• Attach the string to the right, inner-side of the front
grille.
• Close the panel slowly.
String
Hooks
Grooves
5. Close the front panel slowly.
• Slide the 2 stoppers on the left and right sides
outward until they click.
• Make sure that the front panel is securely xed.
01_EN_3P379751-5C.indd 28 11/9/2015 13:35:46