CTXS07LVJU Owners Manual

16
English
To start operation
Press and select the desired mode.
Each time the is pressed a different setting option is displayed on the LCD.
The INTELLIGENT EYE lamp lights green.
Display
By selecting “ ” from the following icons, the air conditioner will be in COMFORT
AIRFLOW operation combined with INTELLIGENT EYE operation.
blank
No SettingCOMFORT
AIRFLOW
INTELLIGENT
EYE
Combination
When the louvers (horizontal blades) are swinging, the operating as above will stop
movement of them.
The lamp will be lit while human movements are detected.
To cancel operation
Press and select “blank” on the LCD.
The INTELLIGENT EYE lamp goes off.
NOTE
Notes on COMFORT AIRFLOW operation
The louver position will change, preventing air from blowing directly on the occupants of the room.
POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
The air ow rate will be set to AUTO. If the upper and lower air ow direction is selected, the COMFORT AIRFLOW function will be canceled.
Notes on INTELLIGENT EYE operation
Application range is as follows.
90°
55°
23ft
(7m)
55°
Vertical angle 90°
(Side view)
Horizontal
angle 110°
(Top view)
23ft (7m)
Sensor may not detect moving objects further than 23ft (7m) away. (Check the application range)
Sensor detection sensitivity changes according to indoor unit location, the speed of passersby, temperature range, etc.
The sensor also mistakenly detects pets, sunlight, uttering curtains and light re ected off of mirrors as passersby.
INTELLIGENT EYE operation will not go on during POWERFUL operation.
NIGHT SET mode
Page 20
will not go on during use of INTELLIGENT EYE operation.
Notes on combination of COMFORT AIRFLOW operation and INTELLIGENT EYE operation
The air ow rate will be set to AUTO. If the upper and lower air ow direction is selected, the COMFORT AIRFLOW operation will be canceled.
Priority is given to the function of whichever button is pressed last.
CAUTION
Do not place large objects near the sensor.
Also keep heating units or humidi ers outside the sensor’s detection area. This sensor can detect undesirable objects.
Do not hit or violently push the INTELLIGENT EYE sensor. This can lead to damage and malfunction.
01_EN_3P297290-1.indd 1601_EN_3P297290-1.indd 16 10/21/2011 6:28:27 PM10/21/2011 6:28:27 PM