Daikin ENVi Thermostat User Manual
SAFETY CONSIDERATIONS Read these SAFETY CONSIDERATIONS carefully before operating the Daikin ENVi thermostat. Contact your dealer for repair and maintenance. Improper repair and maintenance may result in electric shock or fire. Only use accessories made by Daikin that are specifically designed for use with the thermostat and have them installed by a professional. Contact your dealer to move and reinstall the thermostat. Incomplete installation may result in electric shock or fire.
CONTENTS GETTING STARTED 1 DAIKIN ENVi THERMOSTAT BASICS 2 What’s on the Home Screen? Using the Navigation Buttons Idle Screen About Your Daikin ENVi Thermostat 2 4 5 6 CONNECTING TO THE INTERNET 6 Setting Up WiFi and Obtaining a Registration Code Configuring a Web Portal Account Re-registering the Daikin ENVi Thermostat 7 8 10 USING YOUR DAIKIN ENVi THERMOSTAT 11 System Mode Fan Weather Forecast Resetting the Daikin ENVi Thermostat Rebooting the Daikin ENVi Thermostat Cleaning the Daikin ENVi T
GETTING STARTED Welcome The Daikin HVAC equipment and ENVi thermostat help homeowners conserve energy, save money and reduce their environmental impact. Our products automate energy conservation, making it comfortable when you are home and saving money when you are not. For more information, visit us at DaikinAC.com and DaikinENVi.com. Key features of the Daikin ENVi thermostat: Color display Precision +/- 1°F (0.
DAIKIN ENVi THERMOSTAT BASICS The wireless remote controller should not be used in conjuction with the Daikin ENVi thermostat. The Daikin ENVi thermostat has an easy-to-read color screen that displays all the information you need to set and manage your Daikin ENVi thermostat. Use the navigation buttons on the right to quickly change the temperature, access features, and configure your settings. What’s on the Home Screen? Whenever you press a button, the Home screen is displayed.
2. System Mode The current method of temperature control: heat, cool, or both (auto). See System Mode on page 12. 3. Current Set Point The temperature at which the system is programmed to maintain at a particular point in time. Press ▲(up) or ▼(down) to adjust it manually by increments of 1°F (0.5°C). If the system is set to Auto, press ◀(left) or ▶(right) to switch between heat and cool set points. When you manually adjust the set temperature, you put the system into a Hold mode.
Using the Navigation Buttons OK The navigation buttons located on the right of the Daikin ENVi thermostat let you select options and control the Daikin ENVi thermostat. ▲ (up) On the Home screen, press ▲ to increase the temperature set point by 1°F (0.5°C). For menus, press ▲ to move up. ▼ (down) On the Home screen, press ▼ to decrease the temperature set point by 1°F (0.5°C). For menus, press ▼ to move down.
On-Screen Keyboard If you need to type in any information, an onscreen keyboard will appear. To enter a letter or number, press the arrow keys to move to a character and then press OK to select it. Select to enter capital letters; select to enter commonly used symbols. If you make a mistake, press to delete the text . To keep your changes, select . To cancel your changes, press the BACK button.
About Your Daikin ENVi Thermostat To view information about your Daikin ENVi thermostat: From the Home screen, press MENU. Select About. The About menu displays useful information about your Daikin ENVi thermostat, its serial number, and optional information about the contractor who installed it. You may need this information if you are having difficulties or need technical support. The About page also displays information about your current WiFi configuration.
Setting Up WiFi and Obtaining a Registration Code The Daikin ENVi thermostat uses your home WiFi network to connect to the Internet. First, enable WiFi on the Daikin ENVi thermostat (see instructions to the right). The Daikin ENVi thermostat will display a list of available networks, along with an indication of the signal strength (the more bars, the better) and whether encryption is used.
Having Trouble? If you are having trouble connecting to the Internet or finding your WiFi network, you may need to configure your network parameters manually. See WiFi on page 27. Configuring a Web Portal Account After setting up WiFi on your Daikin ENVi thermostat and obtaining the registration code, you need to configure your Web Portal account. 1. From a web browser on a PC, visit www.DaikinENVi.com and click on the LOGIN link. 2. Click REGISTER THERMOSTAT. 3. Click the Daikin ENVi thermostat. 4.
5. Enter your email address and password. Click Create Web Portal. 6. Enter the registration code displayed on the Daikin ENVi thermostat. Click Register. Note: If you forgot the registration code, select Register Thermostat again from the Daikin ENVi thermostat menu and obtain a new registration code.
7. Return back to your Daikin ENVi thermostat and select Yes to confirm your email address and complete the registration process. If you made a mistake with your email address, select No and repeat the registration process. Your Daikin ENVi thermostat is now registered. You can now monitor and control your Daikin ENVi thermostat from the Web Portal or from your smartphone or tablet. Re-registering the Daikin ENVi Thermostat To reset your registration: From the Home screen, press MENU.
USING YOUR DAIKIN ENVi THERMOSTAT The bright, easy-to-read screen on your Daikin ENVi thermostat makes it simple to review and adjust the settings any time you want. Adjusting the Temperature You can easily adjust the temperature without changing the Daikin ENVi thermostat’s programming by pressing the arrow keys when the Home screen is displayed. Press ▲ to increase the temperature set point by 1°F (0.5°C). Press ▼ to decrease the temperature set point by 1°F (0.5°C).
to within these limits. See the Daikin ENVi Thermostat Installation Manual for information about configuring the minimum temperature difference settings. System Mode To change system mode: From the Home screen, press MENU. Select System. Select your temperature mode: Heat, Cool, Auto or Off. This menu sets your system to use heat, cool, or auto mode: Cool The system will turn on in cooling mode when the current temperature rises above the set temperature.
Auto Turns on the fan when the system is heating or cooling your home, or to satisfy the minimum fan “on” time. When you switch between Auto and ON in fan control, the Daikin ENVi thermostat will prompt you with the following: Hold 2 hours The fan will switch to this setting but revert back to weekly schedule after 2 hours. Hold 4 hours The fan will switch to this setting but revert back to weekly schedule after 4 hours.
Weather Forecast To view the weather forecast: Displays the current outdoor temperature and weather conditions for your registered location. From the Home screen, press MENU. Note that when you register, it’s important to select your location accurately, as Daikin ENVi will use your local weather data to optimize your heating and cooling. You must register your Daikin ENVi thermostat for this feature to operate. Select Weather Forecast. Press OK to switch between the 4-day and 24-hour forecast.
Resetting the Daikin ENVi Thermostat At some point during the life of the Daikin ENVi thermostat you may want to quickly reconfigure it or restore it to the default state. To reset your Daikin ENVi thermostat: From the Home screen, press MENU. Reset Registration Resets the connection between the Daikin ENVi thermostat and the Select Settings ▶ Reset. your personalized Web Portal. Choose the reset option that suits your needs.
Cleaning the Daikin ENVi Thermostat You can clean the Daikin ENVi thermostat’s screen by spraying water or any mild, nonabrasive household cleaner on to a clean cloth. Wipe the surface of the screen with the dampened cloth. Note: Do not spray any liquids directly onto your Daikin ENVi thermostat.
The new homeowners will need to register the Daikin ENVi thermostat and set up their own Web Portal. Taking It With You If you’re moving and want to take the Daikin ENVi thermostat with you, you’ll need to re-connect it to the Internet and update your location and house information (select My House under the Settings tab) . CONFIGURING YOUR DAIKIN ENVi THERMOSTAT This section describes how to configure the personal preferences, temperature settings, and operation of your Daikin ENVi thermostat.
Configuring Personal Preferences To configure personal Preferences: The Preferences menu has settings for personalizing your Daikin ENVi thermostat. From the Home screen, press MENU. Name Select Settings ▶ Preferences. Adjust each option to your personal preferences. You can customize the name of your Daikin ENVi thermostat to suit your needs (i.e. Main Floor). This is useful if you have multiple systems or zones.
Select Brightness to: Set the Active brightness intensity. Set the Standby brightness intensity (see “Idle Screen” on page 5). Set the minimum time the Daikin ENVi thermostat will stay in active brightness before switching to standby brightness. Hold Action Whenever you manually adjust the set temperature, the Daikin ENVi thermostat will indicate you are in a “Hold” mode.
Quick Save Settings In Quick Save mode, your system will automatically increase (in cool mode) or decrease (in heat mode) the temperature set point by the pre-configured amount. Quick Save mode can only be activated from the Web Portal or from the Daikin ENVi smartphone/ tablet application. Access Control You can protect your Daikin ENVi thermostat so that certain features will require the user to enter a 4-digit access code. Use the arrow keys to highlight a number and then press OK.
menus. The About screen is still accessible. Once a valid code has been entered on the Daikin ENVi thermostat, access to restricted features will be allowed until the Daikin ENVi thermostat backlight timer has expired. Temperature Range You can configure the Daikin ENVi thermostat so only a specific heat and/or cool set point range is permitted. Heat Temp Range Press ▲ or ▼ select the maximum or minimum heat set points then press OK.
then enable it with the Daikin wireless remote controller. If enabled, the thermostat’s Smart Recovery and Temp Alert functions are not available. By default, intelligent eye is disabled on the thermostat. Do NOT enable the intelligent eye with the Daikin wireless remote controller when it is disabled on the thermostat as this may cause suboptimal operation and result in invalid recovery and alert messages.
Press ▲ or ▼ to select a delay time and then press OK. Random Start Cool Programming a time in this section will produce a random delay when there is call for cooling. In applications with multiple cooling systems, this prevents all systems from activating at the same time, (thus creating a peak power demand). Press ▲ or ▼ to select a delay time and then press OK.
Absolute Temperature Set a specific heat and cool set point to be used when an event is initiated by the Utility company. If the set point at the time of the event is more favorable (lower in heat mode or higher in cool mode) than what you have programmed, the Daikin ENVi thermostat will use the more favorable set point for the duration of the event. Relative Temperature Program a temperature set back (heat) or set forward (cool) from your existing set point.
Set Up Reminders and Alerts Your Daikin ENVi thermostat can be programmed to remind you of required filter changes and regular maintenance. To set up Reminders: If you are not sure about what equipment you have installed or whether you need to replace rather than clean your filters, please contact your heating and cooling contractor, or consult your original equipment manuals for the recommended maintenance procedures. Select Reminders and Alerts. From the Home screen, press MENU.
If this alert has been set up, you will see the alert on the Daikin ENVi thermostat’s screen. If you’ve configured your personal Web Portal, you will also receive an email alert. Low Temp Limit Select this item to set the temperature at which the Daikin ENVi thermostat will generate a Low Temperature Limit alert: Disabled – No alert will be generated. Enabled – Set temperature range of 35 to 68 °F (1.5 to 20 °C).
Display Alerts on Thermostat Select No if you do not want any of the alerts to be displayed on the screen. Alerts will continue to be displayed on the Web Portal and sent via email. Enable Heating/Cooling Alerts Select No if you do not want the Daikin ENVi thermostat to generate an alert if a system is not responding to a call for heat or cool. If disabled, these alerts will not be shown on the Daikin ENVi thermostat or Web Portal and no emails will be sent.
If you need to specify your Daikin ENVi thermostat’s MAC address in your router’s configuration, you can obtain it from the About menu. To view your weekly schedule: From the Home screen, press MENU. Select Weekly Schedule. Your weekly schedule is shown on the screen. To edit your weekly schedule: Display your Weekly Schedule. Press OK. Select the Day. Creating Your Weekly Schedule Your heating and cooling needs change depending on the time of day and day of the week.
The Daikin ENVi thermostat learns how your home and system performs. Intelligent algorithms combine weather data, your system run times and occupancy schedules to optimize performance and maximize energy savings. This means you can be comfortable when you are home and save money when you are not. If your schedule changes, you can quickly and easily update the Daikin ENVi thermostat settings on the device itself or online through your Web Portal.
Adding New Periods To add a new period: Display the schedule for a day and select Add New. Select Create New Item. Enter a name for the new period and select Save. If your house is in-use during this period, select Yes; otherwise select No. Select Enable. Select the new time and press OK. The new period is added. To schedule a vacation: From the Home screen, press MENU. Select Vacation. Select Add Vacation. Enter a Name. Enter the Start and End dates and times of your vacation.
Heat Temperature Programs the set temperature when the system is in Heat mode. Set a lower temperature to save energy. Cool Temperature Programs the set temperature when the system is in Cool mode. Set a higher temperature to save energy. You can also choose to turn off your system while you are away to save more energy. Fan Toggles the fan setting between ON and Auto. ON The fan runs all the time regardless of programming or if there is a call for heat or cool.
to those settings. If you were in Hold mode prior to the start of your vacation, the Daikin ENVi thermostat will restore the home to whatever the set temperature was just prior to your vacation. Delete Vacation You can delete individual or all vacation events: To remove an individual vacation event, display the details about the vacation event, then select Delete Vacation ▶ Yes. To remove all vacation events, display the Vacation menu and select Delete All ▶ Yes.
UNDERSTANDING ALERTS From time to time your system will display an alert — a reminder to perform regular maintenance, for example. If you have connected your Daikin ENVi thermostat to the Internet, these alerts can also be sent to you via email. When an alert displays, you can dismiss it or ask to be reminded later. For example, if you receive a regular maintenance alerts and choose Remind me later, the alert will clear and display again 3 days later.
Low Temp Limit Temperature in the home is too low. High Temp Limit Temperature in the home is too high. Heat Not Responding The system has failed to heat the home. Cool Not Responding The system has failed to cool the home. System Service HVAC system due for regular maintenance. Auxiliary Heat Run Time Auxiliary heat source is running too often. Auxiliary Outdoor Temperature Your auxiliary heat has been called to run when the outdoor temperature exceeds the programmed set point.
ONE-YEAR LIMITED WARRANTY Daikin AC (Americas), Inc., (“Daikin AC”) warrants that for a period of one (1) year from the date of purchase by the end-user (“Customer”), the Daikin ENVi thermostat (the “Product”) shall be free of defects in materials and workmanship under normal use and service. During the limited warranty period, Daikin AC shall, at its option, repair or replace any defective Products, at no charge.
The limited warranty is for repair or replacement of parts or Product only. Except to that limited extent, Daikin AC will not under any circumstances be liable for any loss, cost, damage, or expense of any kind arising out of a breach of this limited warranty or otherwise.
END USER SOFTWARE LICENSE AGREEMENT The software for your thermostat device is provided to Daikin AC (Americas), Inc. (“Daikin”) under license from ecobee, Inc., and your use is governed by the following terms: Please read the following carefully, as this end user software license agreement (“EULA”) is a legal agreement between ecobee Inc.
Product, which are each governed by and subject to separate terms and conditions. 4.
Upon any termination, LICENSEE shall destroy all copies of Software and User Manual. 11. Warranty: (a)Daikin shall provide its standard Product and Software limited warranty statement (“Customer Warranty”), which equally applies to the Software embedded in the Product, and which is incorporated by reference herein, with the Product for your benefit only. In the event of an Error in connection with the Software, refer to the Customer Warranty and Terms of Sale provided with the Product for further detail.
afférents, soit pour le présent ou le futur, soient rédigés en langue anglaise seulement. 15. Jurisdiction: This EULA shall be exclusively governed by, construed and interpreted in accordance with the substantive laws of the United States and the state of Texas.. For the purpose of all legal proceedings this EULA shall be deemed to have been performed in the state of Texas and the parties expressly confirm that the laws of the United States and Texas are the proper laws.
www.DaikinENVi.com Daikin AC (Americas), Inc.
