ENVi Smart Thermostat Owners Manual

to within these limits. See the Daikin ENVi
Thermostat Installation Manual for information
about conguring the minimum temperature
dierence settings.
System Mode
This menu sets your system to use heat, cool, or
auto mode:
Cool The system will turn on in cooling
mode when the current temperature rises
above the set temperature.
Heat The system will turn on in heat mode
when the current temperature drops below
the set temperature.
Auto The system is in Auto-changeover
mode and will activate the heating or
cooling mode to keep your home within the
desired range of set temperatures.
Auxiliary Heat Only The system will only
use the auxiliary or back-up heat source to
maintain the heat set point temperature
(only appears if auxiliary heat is congured).
O The system is o and will only display
the current temperature.
Fan
This menu displays the current Indoor Unit fan
setting:
On Forces the fan to run continuously,
regardless of the weekly schedule
programming. The fan will also run if the
system mode is O.
To change system mode:
From the Home screen,
press MENU.
Select System.
Select your temperature
mode: Heat, Cool, Auto
or O.
To change fan settings:
From the Home screen,
press MENU.
Select Fan.
Congure your fan settings.
12