ENVi Smart Thermostat Owners Manual

Auto Turns on the fan when the system is
heating or cooling your home, or to satisfy
the minimum fan “on” time.
When you switch between Auto and ON in
fan control, the Daikin ENVi thermostat will
prompt you with the following:
Hold 2 hours The fan will switch to
this setting but revert back to weekly
schedule after 2 hours.
Hold 4 hours The fan will switch to
this setting but revert back to weekly
schedule after 4 hours.
Indenite The fan will switch to this
setting and will only revert back if you do
so manually .
Until Next Transition The fan will switch
to this setting but will revert back when
the program switches to the next period.
Update Schedule This will update the
current schedule with the new fan setting.
Minimum “On” Time Sets a minimum
amount of time per hour that the Indoor
Unit fan will run. This improves air circulation
and results in a more consistent temperature
than with the Auto setting while being more
cost-eective than the On setting.
Fan Speed Sets the Indoor Unit fan speed
to Low, Medium, High, or Optimized. In
Optimized, the fan will slow down when the
room temperature is approaching the set
temperature.
Louver Sets the movement of the Indoor
Unit’s louver to Oscillating or Stopped.
Only available if Indoor Unit is equipped with
louvers.
13