ENVi Smart Thermostat Owners Manual

SAFETY CONSIDERATIONS
Read these SAFETY CONSIDERATIONS carefully before operating the Daikin ENVi
thermostat.
Contact your dealer for repair and maintenance. Improper repair and maintenance
may result in electric shock or re. Only use accessories made by Daikin that are
specically designed for use with the thermostat and have them installed by a
professional.
Contact your dealer to move and reinstall the thermostat. Incomplete installation
may result in electric shock or re.
Never let the thermostat get wet. Water can cause an electric shock or a re.
Never use ammable spray such as hair spray, lacquer, or paint near the unit.
Flammable spray may cause a re.
Never inspect or service the unit by yourself. Contact a qualied service person to
perform this work.
Never touch the internal parts of the thermostat. To check and adjust internal
parts, contact your dealer.
Turn o all electrical power before doing any maintenance to avoid the risk of
serious electric shock; never sprinkle or spill water or liquids on the unit.
Do not touch the switch with wet ngers. Touching a switch with wet ngers can
cause an electric shock.
Before cleaning the thermostat, turn o the power, otherwise this may cause an
electric shock.
Do not wipe the thermostat operation panel with benzene, thinner, chemical dust
cloth, etc. The panel may get discolored or the coating can peel o. If it is heavily
dirty, soak a cloth in water-diluted neutral detergent, squeeze it well and wipe the
panel clean. Then wipe it with another dry cloth.
Consult with the installation contractor for cleaning. Incorrect cleaning of the
inside of the thermostat could break the plastic parts and cause electric shock.
Do not allow children to play with the unit to prevent injury.
Never pull or twist the electric wire of the thermostat. It may cause the unit to
malfunction.
Do not expose the thermostat to direct sunlight. The LCD display can become
discolored and may fail to display the data.
Disposal of the thermostat and additional parts should be done in accordance
with the relevant local, state and national regulations.