ENVi Smart Thermostat Owners Manual
Absolute Temperature Set a specic heat
and cool set point to be used when an
event is initiated by the Utility company.
If the set point at the time of the event
is more favorable (lower in heat mode or
higher in cool mode) than what you have
programmed, the Daikin ENVi thermostat
will use the more favorable set point for the
duration of the event.
Relative Temperature Program a
temperature set back (heat) or set forward
(cool) from your existing set point. For
example, if you program a 4 °F set forward,
and your current cool set point is 76 °F,
during an event your Daikin ENVi thermostat
set point will change to 80 °F until the event
has expired.
System O If this option is selected, the
Daikin ENVi thermostat will turn o heating
and cooling for the duration of this event.
Duty Cycle This option allows you to
program the maximum amount of time
the system will run during a 1 hour period.
For example, if you select 30%, the air
conditioner will run for a maximum of 18 (0.3
x 60) minutes regardless of whether the set
point has been met. 0% essentially turns the
system o, whereas 100% runs the system at
full capacity.
24