ENVi Smart Thermostat Owners Manual

to those settings. If you were in Hold mode prior
to the start of your vacation, the Daikin ENVi
thermostat will restore the home to whatever the
set temperature was just prior to your vacation.
Delete Vacation
You can delete individual or all vacation events:
To remove an individual vacation event,
display the details about the vacation event,
then select Delete Vacation ▶ Yes.
To remove all vacation events, display the
Vacation menu and select Delete All ▶ Yes.
Sensors
By default, the Daikin ENVi thermostat’s Internal
Sensor is used for an accurate indication of the
room temperature (recommended setting).
The Indoor Unit is also equipped with a room
temperature sensor which you can use instead.
You can also enable both sensors to provide
an average sensing temperature. However, the
Indoor Unit sensor and averaging methods are
not recommended because the Indoor Unit
sensor, especially wall-mounted models, can be
aected by certain operations such as starting
up and defrosting in a short time which may
cause improper control of the indoor unit by the
ENVi Thermostat.
To congure the
temperature sensors:
From the Home screen,
press MENU.
Select Sensors ▶
Congure.
Enable or disable each
sensor by selecting
Internal Sensor or Indoor
Unit and then selecting
Yes or No.
32