ENVi Smart Thermostat Owners Manual

2. System Mode
The current method of temperature control:
heat, cool, or both (auto). See System Mode on
page 12.
3. Current Set Point
The temperature at which the system is
programmed to maintain at a particular point
in time.
Press ▲(up) or ▼(down) to adjust it manually
by increments of 1°F (0.5°C). If the system is
set to Auto, press ◀(left) or ▶(right) to switch
between heat and cool set points.
When you manually adjust the set temperature,
you put the system into a Hold mode. See Hold
Action on page 19. To return back to the pre-
programmed temperature, press OK.
For maximum savings you should program
your Daikin ENVi thermostat to control the
temperature automatically. See Creating Your
Weekly Schedule on page 28.
4. Current Time/Date
Displays the current date and time for your
time zone.
5. Internet Access
Indicates the WiFi signal strength to the Daikin
ENVi thermostat. The more bars, the stronger
the signal. A chain link indicates communication
with the Daikin ENVi web servers.
3