Engineering

ManualsBrandsDaikin ManualsDampers & BafflesZoning Kit - 3 Zone Box with 8" Take-Offs for Small FDMQ Ducted Mini-Splits

Project Name:

Location:

Approval:

Engineer:

Date:

Submitted to:

Construction:

Submitted by:

Unit #:

Reference:

Drawing #:

Phone: (855) 770-5678

http://www.daikinac.com

Selection Guide

DZK-Zoning Kit rev.2.00

400886

Introduction

Daikin VRV

VRV is a modular, commercially applied air-conditioning and heating system that distributes refrigerant, rather than water,

from the outdoor unit to multiple indoor units providing efficiency, individual user control and reliability in one package.

Absolute comfort and efficiency is achieved with Daikin’s industry leading variable speed Inverter compressors. This means

that only the amount of energy required is used to provide the necessary cooling or heating to each individual indoor unit.

The VRV system is available with several options. One of the options is a Zoning Kit DZK that can be mounted on an Indoor Unit

fan coil to allow conditioned air to be distributed from the unit to several individual zones.

DZK

The optional Daikin Zoning Kit (DZK and DZKS) increases the flexibility of the Daikin VRV system by adding a Zoning Box to an

indoor unit fan coil (FXMQ, FBQ or FXSQ series) allowing several separate ducts to supply air to different individually controlled

zones in the building. A zone can be a room, part of room, or several rooms. This flexible and scalable Zoning Kit integrates with

the indoor unit fan coil and the controls of the VRV system.

A complete Zoning Kit consists of Zoning Box with Controls, Wired Thermostat, Wireless Thermostat and Wireless Lite

Thermostat.

Summary of content (6 pages)

PAGE 1
Selection Guide DZK-Zoning Kit Project Name: Location: Engineer: Submitted to: Submitted by: Reference: rev.2.00 Approval: Date: Construction: Unit #: Drawing #: Introduction Daikin VRV VRV is a modular, commercially applied air-conditioning and heating system that distributes refrigerant, rather than water, from the outdoor unit to multiple indoor units providing efficiency, individual user control and reliability in one package.
PAGE 2
Selection Guide DZK-Zoning Kit Project Name: Location: Engineer: Submitted to: Submitted by: Reference: rev.2.00 Approval: Date: Construction: Unit #: Drawing #: Wired Thermostat The Wired Thermostat is a color graphic interface with capacitive screen and finished in steel and glass. It is the wired thermostat in the Daikin zoning system and it is powered from the Control Board at the Motorized Damper Plenum.
PAGE 3
Selection Guide DZK-Zoning Kit Project Name: Location: Engineer: Submitted to: Submitted by: Reference: • • • • rev.2.00 Approval: Date: Construction: Unit #: Drawing #: Unoccupied Mode Status. Vacation Mode activate/deactivate. Opening Damper Status for each zone. Indoor Unit and DZK errors. Note: For a complete list of available objects, refer to the BACnet Interface installation manual.
PAGE 4
Selection Guide DZK-Zoning Kit Project Name: Location: Engineer: Submitted to: Submitted by: Reference: rev.2.00 Approval: Date: Construction: Unit #: Drawing #: Selection Step 1 - Determine the heat load and the cooling load Determine the heat load and the cooling load for the zone(s) (Part of Room, Room, and Several Rooms) to be climate controlled by the Indoor Unit fan coil in the VRV system.
PAGE 5
Selection Guide DZK-Zoning Kit Project Name: Location: Engineer: Submitted to: Submitted by: Reference: rev.2.
PAGE 6
Selection Guide DZK-Zoning Kit Project Name: Location: Engineer: Submitted to: Submitted by: Reference: rev.2.00 Approval: Date: Construction: Unit #: Drawing #: Step 4 – DZK BACnet Interface (optional) In case of BMS BACnet installation select one DZK BACnet Interface for each DZK zoning box.