Installation Manual
Table Of Contents
- Warnings, environmental policy, and certifications
- System description
- Description, installation and connection of the components
- Initial configuration
- Advanced configuration
- User settings – Wired Thermostat
- Zone settings
- Commissioning steps
- Exception codes
- Auto diagnostics
- Navigation guide
- Troubleshooting
- Wiring diagram
- Página en blanco
24
Installation Manual
Rev. 2.00 Date 01-2019
Changing batteries
When a Wireless Thermostat is running out of battery, it displays the
icon on the screensaver. In the case of the Wireless Lite
Thermostats, a warning message will be displayed on the Wired
Thermostat. In order to know the zone of the Wireless Lite
Thermostat(s) running out of battery press on the warning icon.
To replace the battery, separate the thermostat from its support and
replace the battery (CR2450).
Remember to deposit the old battery into an appropriate recycling
point.
Important: we recommend the
use of top-brand batteries.
The use of low-quality batteries
may reduce the duration of use
.