Installation Manual

35
Installation Manual
Rev. 2.00 Date 01-2019
Keep in mind: to access the main
screen from the Wireless Thermostat
screensaver, press on Airzone.
Important: in Heat Pump
installations, it is recommended
not to activate the global and local
ventilation in a DZK zoning box
connected to the master indoor
unit. It may cause the Stop user
mode to the rest of turn off the DZK
zoning box.
90. Ninety minutes after its activation, the zone will turn off.
Lite Settings. This parameter defines base set-point
temperature for zones with Wireless Lite Thermostat.
Important: This parameter is available when navigating to a zone
controlled by a Wireless Lite Thermostat by using a Wired Thermostat.
ZONE SETTINGS - WIRELESS THERMOSTAT
Press on to access this menu. You will see these settings:
Local Ventilation. This option allows activation or deactivation
of the fan mode the selected when the system is not actively
cooling or heating any of the zones.
Timer. Automatically switches off the zone after the defined time.
You can select:
• OFF. Timer is not activated.
• 30. Thirty minutes after its activation, the zone will turn off.
• 60. Sixty minutes after its activation, the zone will turn off.
• 90. Ninety minutes after its activation, the zone will turn off.
Information. Displays information about:
• Zone: Firmware, zone, association, actuator or status of the
communications.
• System: Firmware, configuration and information about the
controllers.
• Devices: Displays what elements are connected to the
system.
Zone navigation. Zone navigation will be available only when the
Master thermostat is in error. Will be able to access, through the "All
zones" option to the parameters: Set Point, Mode, User mode and
Airflow to modify them.