Unit installation

7Handovertotheuser
Installationmanual
23
EGSQH10S18AA9W
DaikinAlthermagroundsourceheatpump
4P3517471B–2013.12
6.5 Toperformanunderfloorheating
screeddryout
Prerequisite:Makesuretheuserinterfaceshowsthehomescreens
and that the space heating and domestic hot water demands are
turnedoff.
1 Go to [A.7.2]:  > Installer settings > Commissioning > UFH
screeddryout.
2 Setadryoutprogram.
3 SelectStartdryoutandpress .
4 SelectOKandpress .
Result: The underfloor heating screed dryout starts. It stops
automaticallywhendone. To stop it manually, press ,select OK
andpress .
7 Handovertotheuser
Oncethetestrunisfinished andtheunitoperatesproperly,please
makesurethefollowingisclearfortheuser:
▪ Fillintheinstallersettingtable(intheoperationmanual)withthe
actualsettings.
▪ Make sure that the user has the printed documentation and ask
him/hertokeepitforfuturereference.Informtheuserthathecan
findthecompletedocumentationontheurlasearlierdescribedin
thismanual.
▪ Explaintheuserhowtoproperlyoperatethesystemandwhathe/
shehastodoincaseofproblems.
▪ Showtheuserwhathe/shehastodoinrelationtomaintainingthe
unit.
▪ Explain the user about energy saving tips as described in the
operationmanual.
7.1 Tofixtheapplicablelanguageon
theunitnameplate
1 From the multilingual fluorinated greenhouse gases label peal
offtheapplicablelanguage.
2 Stickitontopofthemarkedareaontheunitnameplate.