User manual

©2012DaikinACSlide17
PUBLIC CONFIDENTIAL
DRAFT
ConfiguringtheDaikinENVi Thermostat‐ Preferences
The first step after installing the Daikin ENVi thermostat is to configure the thermostat settings for the Indoor Unit.
Intelligent Eye: Menu > Settings > Preferences > Intelligent Eye > Yes/No
 Some models of the Indoor Unit include an intelligent eye, an infrared sensor that detects room occupancy. It adjust the set point
by 3.6°F (2°C) if no movement is detected in order to save energy (+3.6°F/+2°C if cooling,-3.6°F/-2°C if heating).
 To use intelligent eye, you must enable this option in the Daikin ENVi thermostat and then enable it with the Daikin wireless remote
controller. If enabled, the thermostat’s Smart Recovery and Temp Alert functions are not available.
 By default, intelligent eye is disabled on the thermostat.
 Do NOT enable the intelligent eye with the Daikin wireless remote controller when it is disabled on the thermostat as this may
cause suboptimal operation and result in invalid recovery and alert messages. Also, if an auxiliary heater is configured, enabling
intelligent eye may energize the auxiliary heater more often than would normally be required.