User manual

©2012DaikinACSlide24
PUBLIC CONFIDENTIAL
DRAFT
ConfiguringtheDaikinENVi Thermostat
–
Installation
Settings(continued)
Force System Off: Menu > Settings > Installation Settings > Force System Off
 Force System Off is used to clear a latched system error status in the indoor unit by turning off
the equipment for five seconds after system servicing. Operation will automatically resume with
the previous settings once complete.
T-stat Temp Correction: Menu > Settings > Installation Settings > Tstat Temp Correction
 Lets you program an offset between the real temperature at the thermostat and the displayed
temperature. If you find that the temperature where the thermostat is located does not represent
the room temperature, change the offset to compensate for the difference. The correct
temperature is adjustable from +/- 10°F (+/-5 .6°C) in 0.5°F (0.3°C) increments.
Installer Code: Menu > Settings > Installation Settings > Installer Code
 To prevent accidental modifications to the installation settings, you can enable the following
installer code: 3262. The code is fixed and cannot be changed.
Communications Monitor: > Menu > Settings > Installation Settings > Communications
Monitor
 This will display the last register values for communication with the Indoor Unit.