User manual

©2012DaikinACSlide27
PUBLIC CONFIDENTIAL
DRAFT
ConfiguringtheDaikinENVi Thermostat–Sensors
Menu > Sensors > Configure
Sensors
By default, the Daikin ENVi thermostat’s Internal Sensor is used for an accurate
indication of the room temperature (recommended settings).
The Indoor Unit is also equipped with a room temperature sensor which you can use
instead. You can also enable both sensors to provide an average sensing
temperature. However, the Indoor Unit sensor and averaging methods are not
recommended because the Indoor Unit sensor, especially wall-mounted models, can
be affected by certain operations such as starting up and defrosting in a short time
which may cause improper control of the Indoor Unit by the ENVi Thermostat.
 Enable or disable each sensor by selecting Internal Sensor or Indoor Unit and
then selecting Yes or No.