Installation manual
SAFETY CONSIDERATIONS
Read these SAFETY CONSIDERATIONS for Installation carefully before installing the
Daikin ENVi thermostat kit. After completing the installation, make sure that the unit
operates properly.
Instruct the customer on how to operate and maintain the thermostat. Inform
customers that they should store this Installation Manual with the Operation
Manual for future reference.
Always use a licensed installer or contractor to install this product. Improper
installation can result in electric shock or re.
All electrical work must be carried out in accordance with local, state and national
regulations.
Safely dispose all packing materials in accordance with federal/state/local laws or
ordinances.
Only qualied personnel must carry out the installation work. Installation must be
done in accordance with this installation manual. Improper installation may result
in electric shock or re.
Use only specied accessories and parts for installation work. Failure to use
specied parts may result in electric shock, re or the unit failing.
Make sure that all wiring is secured, that specied wires are used, and that no
external forces act on the terminal connections or wires. Improper connections or
installation may result in re.
Before touching electrical parts, turn o the unit.
Do not touch the thermostat with wet ngers. Touching the thermostat with wet
ngers can cause electric shock.
Do not allow children to play with the unit to prevent injury.
Do not install the thermostat in the following locations:
- Where a mineral oil mist or oil spray or vapor is produced, for example, in a
kitchen.
- Where corrosive gas such as sulfurous acid gas is produced.
- Near machinery emitting electromagnetic waves. Electromagnetic waves may
disturb the operation of the control system and cause the unit to malfunction.
Disposal of the unit must be done in accordance with the relevant local, state and
national regulations.