Installation manual

Daikin System Compatibility
The Daikin ENVi thermostat is designed to
operate only with the Daikin Heat Pump and
Cooling Indoor Units where the BRC944 wired
remote controller is applicable.
The Daikin ENVi thermostat supports the
following systems:
Single-Split system
Multi-Split system (2 to 8 ports)
SkyAir FTXS Indoor Units
Applicable indoor unit models:
FTXS, FTXN (09/12 requires KRP980B1
interface adapter), CTXS, FDXS and CDXS
The Daikin ENVi thermostat can also support a
single-stage auxiliary heater.
Any auxiliary heater that requires air ow
from the Indoor Unit should be equipped
with an air ow switch for safety. The indoor
unit fan could stop during the defrost cycle
and other situations.
Approvals
This product was designed and built in
accordance to RoHS directive 2002/95/EC and
contains no hazardous substances as dened by
this directive.
FCC Compliance Statement
This equipment has been tested and found to
comply with the limits for Class B digital devices,
!
4