Service manual

General Outline: Indoor Units ESIE04-01
1–38 Part 1 – System Outline
3
11
4
5
2.15 FAQ71BUV1B
Outlook and
dimensions
The illustration below shows the outlook and the dimensions of the unit (mm).
Outside line
NOTES 1. Location of unit’s Name Plate: Right
side surface of casing
2. In case of using wireless remote
controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail.
hole
(Required space)
50 or more
Approx.
Name plate (Note 2)
Piping
direction
Piping
direction
Piping direction
(Required space)
50 or more
Dimensions for full open front panel.
hole
(Piping and Wiring intake)
Approx.
Approx.
Approx.
Mounting Location
2500 OR MORE
For installation in
high spaces
120 or less
30 or more
(Required space)
50 OR MORE
(Required space)
RZQ - Final.book Page 38 Monday, September 20, 2004 11:24 AM