Service manual

ESIE04-01 Specifications
Part 1 – System Outline 1–53
3
1
4
5
3.9 FAQ
Technical
specifications
The table below contains the technical specifications.
Electrical
specifications
The table below contains the electrical specifications.
Specification FAQ71BUV1B FAQ100BUV1B
Heat exchanger Rows x stages x fin pitch 2 x 16 x 1.4 2 x 12 x 1.4
Face area 0.289 m² 0.332 m²
Tube type Hi-XA N-Hix
Fin type Multi louver
Fan Air flow rate cooling (high) 19.0 m³/min 23.0 m³/min
Air flow rate cooling (low) 15.0 m³/min 19.0 m³/min
Air flow rate heating (high) 19.0 m³/min 23.0 m³/min
Air flow rate heating (low) 15.0 m³/min 19.0 m³/min
Qty x model 1 x QCL9686M 1 x QCL1163MA +
QCL1163MB
Fan speed 2 steps
Fan type Cross flow fan
Refrigerant Type R410A
Safety and functional devices
Air filter
Temperature control
Insulation Heat Foamed polystyrene /
foamed polyethylene
Sound absorbing –
Weight Unit 13 kg 26 kg
Gross 17 kg 34 kg
Specification FAQ71BUV1B FAQ100BUV1B
Unit Phase 1~
Voltage 220-240 V
Frequency 50 Hz
Fan motor FLA (Full load amps) 0.4 A
Power consumption 68 W 101 W
No. of motors x output 1 x 43 W 1 x 49 W
RZQ - Final.book Page 53 Monday, September 20, 2004 11:24 AM