OPERATION MANUAL English SPLIT SYSTEM Air Conditioner Deutsch MODELS (Wall mounted type) FAQ71BUV1B Français FAQ71BVV1B Español Italiano Ελληνικά Nederlands Portugues Русский
j d a h f e g i b d c e f k [1]
Thank you for purchasing this Daikin air conditioner. Carefully read this operation manual before using the air conditioner. It will tell you how to use the unit properly and help you if any trouble occurs. This manual explains about the indoor unit only. Use it along with the operation manual for the outdoor unit. After reading the manual, file it away for future reference.
■ DISPOSAL REQUIREMENTS ■ VORSCHRIFTEN ZUR ENTSORGUNG ■ INSTRUCTIONS D’ÉLIMINATION ■ REQUISITOS PARA LA ELIMINACIÓN ■ SPECIFICHE DI SMALTIMENTO ■ ΠΡΟΫΠΟΘΕΣΕΙΣ ΑΠΟΡΡΙΨΗΣ ■ VEREISTEN VOOR HET OPRUIMEN ■ REQUISITOS PARA A ELIMINAÇÃO Disposal requirements Your air conditioning product is marked with this symbol. This means that electrical and electronic products shall not be mixed with unsorted household waste.
CONTENTS ILLUSTRATION ................................................... [1] 1. WHAT TO DO BEFORE OPERATION .......... 1 2. SAFETY CONSIDERATIONS........................ 2 3. OPERATION RANGE .................................... 3 4. INSTALLATION SITE .................................... 4 5. OPERATION PROCEDURE .......................... 4 6. OPTIMUM OPERATION ................................ 5 7. MAINTENANCE (FOR SERVICE PERSONNEL) ..................... 6 8. NOT MALFUNCTION OF THE AIR CONDITIONER ........
2. SAFETY CONSIDERATIONS We recommend that you read this instruction manual carefully before use to gain full advantage of the function of the air conditioner, and to avoid malfunction due to erroneous handling. This air conditioner comes under the term “appliances not accesible to the general public”. • The precautions described below are WARNING and CAUTION. These are very important precautions concerning safety. Be sure to observe all of them without fail. WARNING ...
Neither place a flammable spray bottle near the air conditioner nor perform spraying. Doing so may result in a fire. To clean the air conditioner, stop operation, and unplug the power cord from the outlet. Otherwise, an electric shock and injury may result. Do not operate the air conditioner with a wet hand. An electric shock may result. Do not place items that might be damaged by water under the indoor unit. Water may condensate and drip if the humidity reaches 80% or if the drain exit gets clogged.
4. INSTALLATION SITE Regarding places for installation • Is the air conditioner installed at a well-ventilated place where there are no obstacles around? • Do not use the air conditioner in the following places. a.Filled with much mineral oil such as cutting oil b.Where there is much salt such as a beach area c.Where sulfured gas exists such as a hot-spring resort d.Where there are considerable voltage fluctuations such as a factory or plant e.Vehicles and vessels f .
A. UP AND DOWN DIRECTION We recommend using the fan in the position listed above when fixing the fan direction. Press the AIR FLOW DIRECTION ADJUST button to select the air direction as following. The AIR FLOW FLAP display swings as shown below and the air flow direction continuously varies. (Automatic swing setting) swing B.
energy. When reoperating, turn on the main power supply switch 6hours before operation for smooth running (Refer to MAINTENANCE). • When the display shows “ ”, ask a qualified service person to clean the filters (Refer to MAINTENANCE). 7.
1. Open the front panel. Place your fingers on the panel protrusions on the left and right sides of the main unit and open until the panel stops. • To protect the unit, turn on the main power switch at least 6 hours before operation. WHAT TO DO WHEN STOPPING THE SYSTEM FOR A LONG PERIOD Turn on FAN OPERATION for a half day and dry the unit. • Read the operation manual that came with the remote controller. 2. Remove the front panel.
• The system does not start immediately after the power supply is turned on. Wait one minute until the micro computer is prepared for operation. • A “Pishi-pishi” squeaking sound is heard when the system is in operation or after the stop of operation. Expansion and contraction of plastic parts caused by temperature change makes this noise. II. The fan speed is different from the setting. • Pressing the fan speed control button does not change the fan speed.
OPERATION lamp UNIT No. C L H INDOOR UNIT No. in which a malfunction occurs INSPECTION display MALFUNCTION CODE Measure: Notify your Daikin dealer and inform him/her of the display. II. If the system does not properly operate except for the above mentioned case, and none of the above mentioned malfunctions is evident, investigate the system according to the following procedures. 1. If the system does not operate at all. • Check if there is a power failure. Wait until power is restored.
3PN07753-5 EM03A090C (0608) FS