Service Manual
Table Of Contents
- Cover
- Table of contents
- Part 1 List of Functions
- Part 2 Specifications
- Part 3 Printed Circuit Board Connector Wiring Diagram
- Part 4 Refrigerant Circuit
- Part 5 Functions and Control
- Part 6 Test Operation and Field Settings
- Part 7 Remote Controller
- Part 8 Troubleshooting
- 1. Troubleshooting with LED
- 2. Service Diagnosis
- 3. Error Codes and Description
- 4. Troubleshooting for CTXG, CTXS, FTXS, CDXS, FDXS, FVXS Series
- 5. Troubleshooting for FFQ Series
- 6. Troubleshooting for Branch Provider (BP) Unit
- 7. Troubleshooting for Outdoor Unit
- 8. Thermistor Resistance/Temperature Characteristics
- 9. Pressure Sensor
- 10. Method of Replacing Inverter’s Power Transistors Modules
- Part 9 Appendix
Field Settings SiUS181631EA
146 Test Operation and Field Settings
Wireless Remote
Controller Kit
(BRC082A41W,
BRC082A42W(S))
To set the field settings, you have to change:
Mode No.
First code No.
Second code No.
1. When in normal mode, hold down the /TEST button for at least 4 seconds to enter the Field
Set mode.
2. Select the desired Mode No. with the MODE button.
3. Press the button and select the First code No.
4. Press the button and select the Second code No.
5. Press the RESERVE button to confirm the settings.
6. Press the /TEST button to quit the Field Set mode and to return to normal display again.
RESERVE button
Mode No.
Field setting mode
UP button
DOWN button
First code No.
Second code No.
MODE button
(R24061)
INSPECTION/TEST
button