Service Manual

SiUS181631EA BRC1E73 (Wired Remote Controller)
Remote Controller 165
1. Operation mode selector button
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2. Fan speed control button
3. Menu/OK button
4. Up button
5. Down button
6. Right button
7. Left button
8. On/Off button
9. Operation lamp
10. Cancel button
11. LCD (with backlight)
Press this button to select the operation
mode of your preference.
* Available modes vary with the indoor unit
model.
Used to highlight the next items on the
left-hand side.
Each screen is scrolled in the left-hand
direction.
Press this button and system will start.
Press this button again to stop the system.
This lamp illuminates solid green during
normal operation.
This lamp flashes if an error occurs.
Used to return to the previous screen.
The backlight will be illuminated for
approximately 30 seconds by pressing any
button.
If two remote controllers are used to control
a single indoor unit, only the controller
accessed first will have backlight
functionality.
Press this button to select the fan speed of
your preference.
* Available fan speeds vary with the indoor
unit model.
Used to enter the main menu.
Used to enter the selected item.
Used to raise the setpoint.
The item above the current selection will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
Used to lower the setpoint.
The item below the current selection will be
highlighted.
(The highlighted items will be scrolled
continuously when the button is
continuously pressed.)
Used to change the selected item.
Used to highlight the next items on the
right-hand side.
Each screen is scrolled in the right-hand
direction.