Service Manual

Forced Cooling Operation SiUS091601EA
201 Part 7 Trial Operation and Field Settings
For FDMQ series
R7000276
FDMQ Series with Wired Remote Controller (BRC1E73)
FDMQ Series with Wireless Remote Controller (BRC082A43)
1. Set to COOL operation using the remote
controller.
2. Press and hold Cancel button for 4 seconds
or longer. Service settings menu is
displayed.
3. Select in the service
settings menu, and press Menu/OK button.
Basic screen returns and “Test Operation”
is displayed at the bottom.
4. Press On/Off button within 10 seconds, and
the forced cooling operation starts.
Forced cooling operation will stop
automatically after about 15 minutes.
To stop the operation, press On/Off button.
1. Press button and select the COOL
operation.
2. Press button twice. “TEST” is
displayed.
3. Press button within 10 seconds, and
the forced cooling operation starts.
Forced cooling operation will stop
automatically after about 15 minutes.
To stop the operation, press button.
Test Operation
Basic screen
1.
2.
3.
4.
Service Settings
menu screen
Press and hold Cancel
button for 4 seconds or
longer during backlight lit.
Press Menu/OK button.
Press On/Off button
(within 10 seconds).