Engineering
Table Of Contents
- Cover
- Table of contents
- 1. Power Supply
- 2. Functions
- 3. Specifications
- 4. Dimensions
- 5. Wiring Diagrams
- 6. Piping Diagrams
- 7. Capacity Tables
- 8. Operation Limit
- 9. Sound Level
- 10. Electric Characteristics
- 11. Installation Manual
- 12. Operation Manual
- 13. Optional Accessories
- 13.1 Option List
- 13.2
Wired Remote Controller - 13.3
Wireless LAN Connection Adaptor - 13.4
Wiring Adaptor for Timer Clock / Remote Controller - 13.5
Interface Adaptor for DIII-NET (Residential Air Conditioner) - 13.6
Air Direction Adjustment Grille - 13.7
Back Protection Wire Net - 13.8
Drain Pan Heater - 13.9
Snow Hood (Intake Side Plate) - 13.10
Snow Hood (Intake Rear Plate) - 13.11
Snow Hood (Outlet)
Capacity Tables EDUS041701
20 Split Type Air Conditioners FTX-N Series
3D108102
Symbols: Notes:
AFR : Airflow rate (m
3
/min.) 1. shows nominal (rated) capacities and power input.
2. TC, PI and SHC must be calculated by interpolation using the figures in the
above tables. (Figures out of the tables should not be used for calculation.)
3. Capacities are based on the following conditions.
Corresponding refrigerant piping length : 25 ft (7.5 m)
Level difference : 0 ft (0 m)
4. Airflow rate (AFR) and bypass factor (BF) are tabulated above table.
BF : Bypass factor
EWB : Entering wet bulb temp. (°C) / (°F)
EDB : Entering dry bulb temp. (°C) / (°F)
TC : Total capacity (kW) / (kBtu/h)
SHC : Sensible heat capacity (kW) / (kBtu/h)
PI : Power input (kW)