Operation Manual

20
English
TIMER Operation
To use OFF TIMER operation
Check that the clock is correct.
If not, set the clock to the present time.
Page 10
1. Press
“ ” is displayed on the LCD.
“
” blinks.
“
” and day of the week disappear from the LCD.
2. Press until the time setting reaches the point
you like
Each pressing of either button increases or decreases the time setting by 10minutes.
Holding down either button changes the time setting rapidly.
3. Press again�
“ ” and setting time are displayed on the LCD.
The TIMER lamp lights orange.
Page 5
Display
To cancel OFF TIMER operation
Press
“ ” and setting time disappear from the LCD.
“
” and day of the week are displayed on the LCD.
The TIMER lamp goes off.
To combine ON TIMER and OFF TIMER operation
A sample setting for combining the 2timers is shown below.
(Example)
Present time: 23:00 (The unit is operating)
OFF TIMER at 0:00
ON TIMER at 14:00
Combined
NOTE
NIGHT SET mode
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.9°F (0.5°C) up in COOL, 3.6°F (2.0°C) down in
HEAT) to prevent excessive cooling (heating) during sleeping hours.
01_EN_3P457796-1.indd 20 12/5/2016 3:44:50 PM