Operation Manual

English
10
NOTE
Note on setting the clock 
If the indoor unit’s internal clock is not set to the correct time, the ON TIMER, OFF TIMER and WEEKLY TIMER will not operate punctually.•
 Turn on the circuit breaker
After the power is turned on, the fl aps of the indoor unit open and close once to set •
the reference position.
To set the clock 
Press 1. .
“ • ” is displayed on the LCD.
“ • ” and “ ” blink.
Press 2. to set the current day of the week.
Press
3. .
“ • ” blinks.
Press 4. to set the clock to the present time.
Holding down • or rapidly increases or decreases the time display.
Press 5. .
Point the remote controller at the indoor unit when pressing the buttons.•
“ • ” blinks.
01_EN_3P357704-1.indd 1001_EN_3P357704-1.indd 10 12/17/2013 3:21:59 PM12/17/2013 3:21:59 PM