Specifications

SiBE04-624_B Main Functions
Function and Control 45
1.18 MOLD SHOCK OUT Operation
The room is kept clean by removing excessive moisture by rapidly lowering the humidity in the
room for 1 hour, and keeping operation for 2 hours (total 3 hours).
Operation It is not self-starting operation.
Features

Dry shock method
Generation of mold is prevented by sudden drying of humid environment. It is generally said that
the growth of mold can be prevented by lowering the humidity to half and continuing the
operation for 3 hours.

Time chart
• Operation runs about for 3 hours in total while changing colors of the multi-colored
indicator lamp.
• Reheating dehumidifying which dehumidifies continuously.
(R13895)
MOLD SHOCK OUT Operation
(Hold down for 2 seconds.)
(R13897)
The test was conducted at DAIKIN’s laboratory with use of the
mold sensor of Environmental Biological Research Institute.
Before MOLD SHOCK OUT
operation
Without MOLD SHOCK OUT
operation
With MOLD SHOCK OUT
operation
Fewer molds grow as compared with the case
of without MOLD SHOCK OUT Operation.
Operation
ON
<Airflow rate in reheating dehumidifying>
Indoor Fan
Room Temperature
Airflow direction
<Angle in comfort airflow mode>
Compressor
OFF
Approx. 3 hours
(R18332)
<Note> The room temperature becomes lower by about 5˚C than the temperature at the start of operation.
Reheating dehumidifying
room temperature setting
Continuous operation in
max. frequency
Initial setting for reheating
dehumidifying