Operation Manual

32
CAUTION
• When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
• When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
• After cleaning, make sure that the front panel is securely xed.
1. Remove the front panel.
• Slide the front panel to either the left or right and
pulling it toward you.
This will disconnect the rotation dowel on one side.
• Disconnect the front panel shaft on the other
side in the same manner.
1) Slide
2) Pull
2. Clean the front panel.
• Wipe it with a soft cloth soaked in water.
• Only neutral detergent may be used.
• In case of washing the panel with water, wipe it
with dry soft cloth, dry it up in the shade after
washing.
3. Attach the front panel.
• Align the front panel shaft on the left and right of
the front panel with the slots, then push them all
the way in.
Front panel shaft
Slot
• Close the front panel slowly.
• Press the front panel at both sides and the
center.
■
Removing the front panel