Specifications

SiENBE04-507A Instruction
System Configuration 97
ATTENTION
 To use ON TIMER operation
• Check that the clock is correct. If not, set the
clock to the present time. (page 84)
1. Press “ON TIMER button”.
6:00 is displayed.
blinks.
2. Press “TIMER Setting button” until the time
setting reaches the point you like.
• Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
3. Press “ON TIMER button” again.
• The TIMER lamp lights up.
 To cancel ON TIMER operation
4. Press “CANCEL button”.
• The TIMER lamp goes off.
 To combine ON TIMER and OFF TIMER
• A sample setting for combining the two timers is
shown below.
TEMP
ON/OFF
POWERFUL
MODE
FA N
SWING
SILENT SENSOR
ECONO
COMFORT
TIMER
ON CANCEL
OFF
2
1, 3
4
Display
(Example)
Present time: 11:00 PM
(The unit operating)
OFF TIMER at 0:00 a.m.
ON TIMER at 7:00 a.m.
Combined
 In the following cases, set the timer again.
• After a breaker has turned OFF.
• After a power failure.
• After replacing batteries in the remote control.