Installation manual

ManualsBrandsDaikin ManualsDomestic AppliancesFXUQ71MV1

English

Deutsch

Français

Español

Italiano

Nederlands

Portugues

READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION.

KEEP THIS MANUAL IN A HANDY PLACE FOR FUTURE REFERENCE.

LESEN SIE DIESE ANWEISUNGEN VOR DER INSTALLATION SORGFÄLTIG DURCH.

BEWAHREN SIE DIESE ANLEITUNG FÜR SPÄTERE BEZUGNAHME GRIFFBEREIT AUF.

LIRE SOIGNEUSEMENT CES INSTRUCTIONS AVANT L’INSTALLATION.

CONSERVER CE MANUEL A PORTEE DE MAIN POUR REFERENCE ULTERIEURE.

LEA CUIDADOSAMENTE ESTAS INSTRUCCIONES ANTES DE INSTALAR.

GUARDE ESTE MANUAL EN UN LUGAR A MANO PARA LEER EN CASO DE TENER

ALGUNA DUDA.

PRIMA DELL’INSTALLAZIONE LEGGERE ATTENTAMENTE QUESTE ISTRUZIONI.

TENERE QUESTO MANUALE A PORTATA DI MANO PER RIFERIMENTI FUTURI.

ÄΙΑΒΑΣΤΕ ΠΡΟΣΕΚΤΙΚΑ ΑΥΤΕΣ ΤΙΣ ΟÄΗΓΙΕΣ ΠΡΙΝ ΑΠΟ ΤΗΝ ΕΓΚΑΤΑΣΤΑΣΗ ΕΧΕΤΕ ΑΥΤΟ

ΤΟ ΕΓΧΕΙΡΙÄΙΟ ΕΥΚΑΙΡΟ ΓΙΑ ΝΑ ΤΟ ΣΥΜΒΟΥΛΕΥΕΣΤΕ ΣΤΟ ΜΕΛΛΟΝ.

LEES DEZE INSTRUCTIES ZORGVULDIG DOOR VOOR INSTALLATIE. BEWAAR DEZE HAN-

DLEINDING WAAR U HEM KUNT TERUGVINDEN VOOR LATERE NASLAG.

LEIA COM ATENÇÃO ESTAS INSTRUÇÕES ANTES DE REALIZAR A INSTALAÇÃO.

MANTENHA ESTE MANUAL AO SEU ALCANCE PARA FUTURAS CONSULTAS.

ПЕРЕД НАЧАЛОМ МОНТАЖА ВНИМАТЕЛЬНО ОЗНАКОМЬТЕСЬ С ДАННЫМИ

ИНСТРУКЦИЯМИ. СОХРАНИТЕ ДАННОЕ РУКОВОДСТВО В МЕСТЕ, УДОБНОМ ДЛЯ

ОБРАЩЕНИЯ В БУДУЩЕМ.

MODELS

Ceiling-mounted Duct type

FXMQ40MVE FXMQ100MVE FXMQ40MAVE FXMQ100MAVE

FXMQ50MVE FXMQ125MVE FXMQ50MAVE FXMQ125MAVE

FXMQ63MVE FXMQ200MVE FXMQ63MAVE FXMQ200MAVE

FXMQ80MVE FXMQ250MVE FXMQ80MAVE FXMQ250MAVE

SYSTEM Inverter Air Conditioners

INSTALLATION MANUAL

00_CV_3P086156-6X.fm Page 1 Thursday, April 9, 2009 2:58 PM

Summary of content (13 pages)

PAGE 1
00_CV_3P086156-6X.fm Page 1 Thursday, April 9, 2009 2:58 PM INSTALLATION MANUAL English SYSTEM Inverter Air Conditioners Deutsch MODELS Ceiling-mounted Duct type FXMQ40MVE FXMQ50MVE FXMQ63MVE FXMQ80MVE FXMQ100MVE FXMQ125MVE FXMQ200MVE FXMQ250MVE Français FXMQ40MAVE FXMQ50MAVE FXMQ63MAVE FXMQ80MAVE FXMQ100MAVE FXMQ125MAVE FXMQ200MAVE FXMQ250MAVE Español Italiano READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION. KEEP THIS MANUAL IN A HANDY PLACE FOR FUTURE REFERENCE.
PAGE 2
EN60335-2-40, FXZQ20MVE, FXZQ25MVE, FXZQ32MVE, FXZQ40MVE, FXZQ50MVE FXCQ20MVE, FXCQ25MVE, FXCQ32MVE, FXCQ40MVE, FXCQ50MVE, FXCQ63MVE, FXCQ80MVE, FXCQ125MVE FXMQ40MVE, FXMQ50MVE, FXMQ63MVE, FXMQ80MVE, FXMQ100MVE, FXMQ125MVE, FXMQ200MVE, FXMQ250MVE FXLQ20MVE, FXLQ25MVE, FXLQ32MVE, FXLQ40MVE, FXLQ50MVE, FXLQ63MVE FXNQ20MVE, FXNQ25MVE, FXNQ32MVE, FXNQ40MVE, FXNQ50MVE, FXNQ63MVE FXHQ32MVE, FXHQ63MVE, FXHQ100MVE FXSQ20MVE, FXSQ25MVE, FXSQ32MVE, FXSQ40MVE, FXSQ50MVE, FXSQ63MVE, FXSQ80MVE, FXSQ100MVE, FXSQ125MVE
PAGE 3
01_EN_3P086156-6X.fm Page 1 Thursday, April 9, 2009 3:01 PM VRV SYSTEM Inverter Air Conditioners CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. SAFETY PRECAUTIONS................................................ 1 BEFORE INSTALLATION................................................ 2 SELECTING INSTALLATION SITE ................................. 3 PREPARATIONS BEFORE INSTALLATION ................... 4 INDOOR UNIT INSTALLATION....................................... 4 REFRIGERANT PIPING WORK ............................
PAGE 4
01_EN_3P086156-6X.fm Page 2 Thursday, April 9, 2009 3:01 PM 2. Where corrosive gas, such as sulphurous acid gas, is produced. Corroding of copper pipes or soldered parts may result in refrigerant leakage. 3. Near machinery emitting electromagnetic radiation. Electromagnetic radiation may disturb the operation of the control system and result in a malfunction of the unit. 4.
PAGE 5
01_EN_3P086156-6X.fm Page 3 Thursday, April 9, 2009 3:01 PM FOR THE FOLLOWING ITEMS, TAKE SPECIAL CARE DURING CONSTRUCTION AND CHECK AFTER INSTALLATION IS FINISHED. a. Items to be checked after completion of work Items to be checked If not properly done, what is likely to occur. Check Are the indoor and outdoor unit The units may drop, vibrate or fixed firmly? make noise. Is the gas leak test finished? It may result in insufficient cooling. Is the unit fully insulated? Condensate water may drip.
PAGE 6
01_EN_3P086156-6X.fm Page 4 Thursday, April 9, 2009 3:01 PM 4. PREPARATIONS BEFORE INSTALLATION (1) Relative positions of indoor unit and suspension bolt. (Refer to Fig. 2) FXMQ40 · 50 · 63 · 80 · 100 · 125M(A)VE Suspension bolt (× 4) A Indoor unit B 5.
PAGE 7
01_EN_3P086156-6X.fm Page 5 Thursday, April 9, 2009 3:01 PM 6. REFRIGERANT PIPING WORK 〈For refrigerant piping of outdoor units, see the installation manual attached to the outdoor unit.〉 〈Execute heat insulation work completely on both sides of the gas piping and the liquid piping. Otherwise, a water leakage can result sometimes.〉 (When using a heat pump, the temperature of the gas piping can reach up to approximately 120°C, so use insulation which is sufficiently resistant.
PAGE 8
01_EN_3P086156-6X.fm Page 6 Thursday, April 9, 2009 3:01 PM (1) Carry out the drain piping. • Before brazing local refrigerant piping, nitrogen gas shall be blown through the piping to expel air from the piping. If your brazing is done without nitrogen gas blowing, a large amount of oxide film develops inside the piping, and could cause system malfunction.
PAGE 9
01_EN_3P086156-6X.fm Page 7 Thursday, April 9, 2009 3:01 PM 8-3 CAUTION • Drain piping connections Do not connect the drain piping directly to sewage pipes that smell of ammonia. The ammonia in the sewage might enter the indoor unit through the drain pipes and corrode the heat exchanger. 8. 8-1 Remote controller wiring Transmission wiring Power supply wiring Model Field fuses Wire Size H05VVU3G Size must comply with local codes.
PAGE 10
01_EN_3P086156-6X.
PAGE 11
01_EN_3P086156-6X.fm Page 9 Thursday, April 9, 2009 3:01 PM 1. When using 1 remote controller for 1 indoor unit. (Normal operation) " $$ %& '%( )%*+ %( " $$ %& '%( " $$ %& '%( " $$ %& '%( • When using 2 remote controllers, one must be set to “MAIN” and the other to “SUB”.
PAGE 12
01_EN_3P086156-6X.fm Page 10 Thursday, April 9, 2009 3:01 PM (2) Actuation • The following table explains FORCED OFF and ON/OFF OPERATIONS in response to Input A. FORCED OFF ON/OFF OPERATION Input “ON” stops operation (impossible by remote controllers.) Input OFF → ON turns ON unit. Input OFF enables control by remote controller. Input ON → OFF turns OFF unit. (3) How to select FORCED OFF and ON/OFF OPERATION • Turn the power on and then use the remote controller to select operation.
PAGE 13
00_CV_3P086156-6X.