Installation manual

Addendum IM 1152 — Thermostat Conversion Kit
©2006 McQuay International [phone] www.mcquay.com IM 831 Page 2 of 2
McQuay International reserves the right to change design and specifications without notice in support of our policy of continuous product and data improvement.
4. Adjust the dip switch and jumpers to your desired
configuration (see thermostat installation manual).
5. Pull off the fan slide switch cap (Figure 3).
Note: Be careful not to change the position of the
switch you set in Step 2.
Fan slide switch cap
Figure 3. Remove plastic fan slide switch cap
Figure 4. Thermostat cover without 3-speed switch
opening
6. Place the new thermostat cover that does not have the
3-speed switch opening on the thermostat (Figure 4).
McQuay Training and Development
Now that you have made an investment in modern, efficient McQuay equipment, its care should be a high priority.
For training information on all McQuay HVAC products, please visit us at www.mcquay.com and click on training, or
call 540-248-9646 and ask for the Training Department.
Warranty
All McQuay equipment is sold pursuant to its standard terms and conditions of sale, including Limited
Product Warranty. Consult your local McQuay Representative for warranty details. Refer to Form
933-43285Y. To find your local McQuay Representative, go to www.mcquay.com.
This document contains the most current product information as of this printing. For the most up-to-date product information,
please go to www.mcquay.com.