Service manual

SiE18-201 Outdoor Unit
Removal Procedure 275
7. Detaching the filter PCB
1
The filter PCB is
located as shown at
right.
2
Disconnect all the
connectors and remove
the four locking guard
spacers. Take out the
filter PCB.
3
Remove the four
screws and take out
the reactors.
4
Lay and dress the
reactor harnesses.
Step Procedure Points
Control PCB
(PCB1)
Filter PCB
(PCB2)
(M1155)
Filter PCB
(PCB2)
(M1156)
Reactors
(M1157)
Reactor
harnesses
(M1158)