Service manual

Operation Manual SiBE811120
20 Photocatalytic Air Purifier L-Series
4.5 How to Operate
13
How to Operate
• Operation starts and the airflow rate lamp lights up.
• When you press next time, operation starts with
the same settings as the previous operation.
• You can release the childproof lock by pressing again for
about 2 seconds.
You can also release the childproof lock when you disconnect
the power plug once, and after 3 seconds or more, reconnect the
power plug.
• The auto fan lamp and one of the airflow rate lamps
“ (Quiet)”, “ (Low)”, “ (Standard)”, or “ (High)”
light up.
(Cancel)
Make sure that the
front panel is closed.
To start the operation
Press .
• When you press during operation, operation stops.
(Example of the initial display)
To prevent mishandling by small children
Childproof lock
• Press for about 2 seconds to engage the childproof lock.
To operate the unit according to the cleanness level of the air
Auto fan operation
Press .
To clean the air in the room quickly
Turbo operation
Press .
To set the timer
Timer operation
Press .
• Each time the button is pressed, the OFF TIMER is set as follows.
“ ” (1 hour)
“ ” (2 hour)
“ ” (4 hour)